How To Get Water Out Of Charging Port In iPhone

It is critical to remove water from a device’s charging port as soon as possible because it will damage the device’s internal components. Water might infiltrate the components of your iPhone if you don’t follow these crucial instructions.

Charging your phone could be dangerous if the port gets wet. For instance, wires and pins may be damaged. Your charging cable or port may therefore stop working.

Avoiding electric shocks is usually a good idea when charging your phone. Although though getting water into your iPhone’s charging port is typically not what you intend, it can nevertheless happen.

There is always a risk while using your phone while performing routine tasks like washing dishes, cooking, or swimming. Discover various easy techniques for removing water from your iPhone’s charging port by carefully reading this article.

Reading: How To Delete Cookies From An iPhone

Leave It To Dry By Itself

There won’t be much work required of you with this strategy. There are a few things you can do to make sure this procedure goes smoothly while waiting for the air to dry the phone eventually.



To prevent a short circuit, turn off your iPhone as soon as it comes into contact with water or when an alert flashes to let you know that there might be water damage.



Your charging port should dry on its own. Even if it seems too wonderful to be true, this approach always works.



Make sure your phone has adequate ventilation. Placing a fan that circulates the air in the area will be quite beneficial, especially if it is pointed at the charging connection. The drying process needs to be able to take place, hence this port needs to be left open.



After 30 minutes, check the port on your smartphone. Wait a few more hours if there is still moisture present or if the gadget keeps reporting that liquid was detected.

Use the other hand to gently tap the charging port if you can only use one hand to hold your phone. You must be careful not to harm anything, and you must always hold the phone with its bottom facing up. Any excess water that has been kept in the charging port will be removed using this method.

Shake Your iPhone

Take the battery out of the phone if you can by opening it up. Then, while holding it upright with the Lightning connector facing down, lightly tap your iPhone against your hand so that gravity can stop water from entering your phone further and allow extra liquid to drip off.

The battery removal process requires some specialised gear, but it is the simplest approach to remove water from your iPhone’s charging port.

Exposure To Warmth and Air

It is well knowledge that heat and sunlight promote evaporation. If your phone has a water problem, you may just leave it out in the open so that the wind can blow into it and dry it.

Sunlight can also be used to dry off the water content. This technique should only be used sparingly, though, as prolonged exposure to the sun could irreversibly damage your phone’s battery, screen, and tiny circuit board.

Reading: How To Delete Cookies From An iPhone

Use Silica Gel

You might have heard how to use rice to get water out of a charging port from a lot of people. Another method that absorbs a lot of moisture besides rice is the use of silica gel. You’ve likely seen silica gel sachets in shoe boxes or bags you’ve bought since it works effectively to absorb moisture.

These little packets of silica gel are simply meant to absorb moisture, shielding your clothing, shoes, and other belongings from the effects of humidity. To be clear, silica is a unique substance that helps to maintain the lowest possible humidity levels by absorbing moisture.

Due to their strong absorption capacity, silica gel packets can be useful for drying off a wet iPhone. Simply place the impacted iPhone in a dish with a few silica packets. Wait a few days after that for the silica gel to completely dry out your iPhone.

Use of Hair Dryer or Vacuum Cleaner

You must choose the Cool setting for the hairdryer technique and blow slowly towards the phone’s slightly inclined surface. However, as heat can damage your phone’s internal components, it is not recommended to use a dryer without a cool mode.

Similar to this, it can be helpful to use a suction hose to remove some water from the charging port on your phone. To do this, all you need to do is attach a hose to your vacuum cleaner, and you’re good to go. After attaching the hose to your phone’s charging port, start the suction.

Unquestionably, the suction will help remove the water from your iPhone’s charging port. Once more, use caution if you use the vacuum’s suction force on your phone.

What Not To Do When Water Gets Into Your Charging Port

We are aware that there is a lot of misinformation online on how to remove water from the charging port. Much of this advice won’t help you fix your equipment and, in some cases, may potentially make matters worse.

Be careful not to:

  • Put your iPhone in rice.
  • Stick stuff into the port.
  • Avoid using a heat source to dry your phone.
  • Do not try to charge your phone.


The number of recent iPhone purchasers who have a high level of confidence is impressive considering that everyone believes their gadgets are waterproof. Due to the IP ratings that these phones have, one’s confidence and carelessness when handling their phone close to or in water may occasionally be heightened.

Regardless of whether your iPhone has an official IP certification, it is not advisable to submerge it in water because Apple’s warranty does not cover water damage. This is true even if your iPhone has an official IP rating.

Leave a Comment