How To Fix New PC Build No Display Problem (2023)

There may be times when you run into one issue or another if you are new to PC construction. The blank screen that appears when you power on a new PC is the main problem. Don’t panic if you encountered the no display problem when using your new PC build; there are a few potential solutions to this problem, and this tutorial will assist you in finding them.

Fix: New PC Build No Display Error (2023)

You can fix your new PC build’s display issue by using the following workarounds:

1. Check your Power Supply

Ensure that the motherboard, CPU, GPU, and other components are correctly connected to your power source. Additionally, confirm that the power supply can support the wattage requirements of your PC build.

2. Check your Monitor

The monitor may not be turned on in some cases, which can result in the no display error. Therefore, ensure that your monitor is powered on and plugged in. Use the proper input source on your monitor as well. Make sure that your monitor is set to HDMI input, for instance, if you are using an HDMI cable. Most monitors have buttons that you can use to change the input source.

3. Check your Video Card

Make that the power supply is connected to your video card and that it is installed securely in the PCIe slot. Additionally, confirm that the video output port on your video card is being used correctly. Make sure you are utilizing a DisplayPort port on your visual card, for instance, if you are using a DisplayPortcable.

4. Check your RAM

The no display error may occur if your RAM sticks are installed incorrectly in your new PC construction. Make that the RAM sticks are compatible with your motherboard and CPU and that they are properly fitted into the DIMM slots. Typically, you can find information about compatibility in the user guide or on the manufacturer’s website. Try using one RAM stick at a time if you have more than one and see if it helps.

5. Check your BIOS settings

To enable or disable particular features or components, you might occasionally need to update or modify your BIOS settings. For instance, in order to run your RAM at its recommended speed and timings, you might need to enable XMP (Extreme Memory Profile). Normally, at startup, you can enter your BIOS by pressing a key on the keyboard like F2, F10, or Delete. Keep in mind that there are various settings available in each BIOS parameter. Therefore, it is advised to go to the website of the company that makes your motherboard to learn more about BIOS settings.

The simple steps to correct the no-display fault on your new PC construction were as follows. Check out some of our other guides, such as How to Increase Dedicated Video RAM (VRAM) on Windows 10 or How to Change Virtual Memory on Windows 11.

Leave a Comment